Heres my amp- Its too big and powerful for my place these days- see below for info and specs. Can get a better pic if needs be! Amps barely used comes with the marshall overdrive footswitch is as good as new!
Collection =Balbriggan/city centre.


G80RCD - 80 Watt Combo
CHANNEL 1 (Normal)
1. Input Jack
Connects the guitar to the amplifier.
2. Gain Control
Controls the gain level of the normal channel on
both Clean and Crunch selections. In Clean mode,
sounds remain clean, even at high gain levels.
When switched to Crunch mode the amount of
crunch increases as you wind the gain up.
3. Clean/Crunch Rhythm Switch
Push switch to select either clean or crunch
sounds on the normal channel (push in for
Crunch).
4-6. Bass, Middle & Treble
Full 3 band EQ for normal channel tonal
selections. These controls are effective and
interactive to give you incredible versatility. Try as
many combinations as possible to really get to
know your EQ.
7. Channel Select
Normal to boost channel selector switch. This
function is also footswitchable. Set the switch to
the in position for the footswitch to function.
LED’s indicate which mode has been selected.
CHANNEL 2 (Boost)
8. Gain Control
Controls the gain level of the boost channel. This
control is effective on either overdrive selection.
On OD1, it fattens the bluesy distortion and on
OD2 goes from rock overdrive to full metallic
thrash as you turn it up.
9. Overdrive Select (OD1 to OD2)
Manually switches from creamy ‘classic’ OD1 to
screaming ‘Hi Gain’ OD2 distortion modes.
10-12. Bass, Middle & Treble
Effective 3 band EQ to shape the tone of all
overdrive selections.
13. Contour Control
This sweeping control shifts the mid-band voicing
of the boost channel to give amazing versatility to
your overdrive sounds. When used in conjunction
with the 3 band EQ, this control is devastating!
14. Volume Control
Controlling the overall level of the boost channel,
this allows volume balancing between the two
channels.
MASTER SECTION
Effects Loop
The effects loop is used for connecting an external
effects processor or floor pedal. Generally it is
advisable to connect time based effects such as
Chorus or Delay through the loop only and any
external distortion type effects directly between
the guitar and the combo.
15. Effects Send Jack
For linking to the input of an external effects
processor or floor pedal.
16. Effects Level Switch
Selects the level to match your external effects
units (0dB for rack units and -20dB for pedals).
17. Effects Return Jack
For connection from the output of an external

Contact details

• Email: Click here to reply to this ad
• Phone: Robert on 0879521974

Anti spam: Do NOT contact me offering services or anything of a commercial nature.